Struct GeoEdge2
- Namespace
- GeometryHelper.Geometry
- Assembly
- GeometryHelper.dll
Whether an edge touches another shape.
public readonly struct GeoEdge2 : IEquatable<GeoEdge2>- Implements
- Inherited Members
Constructors
- GeoEdge2(GeoArc2)
Initializes the edge that draws an arc.
- GeoEdge2(GeoPoint2, GeoPoint2)
Initializes a straight edge between two points.
- GeoEdge2(GeoPoint2, GeoPoint2, double)
Initializes an edge between two points, straight or bulged into an arc.
Properties
- Bulge
Gets the bulge: the tangent of a quarter of the angle an arc sweeps, or zero for a straight segment.
- EndPoint
Gets the point the edge ends at.
- IsArc
Gets a value indicating whether the edge is an arc rather than a straight segment.
- IsValid
Gets whether this is a shape a constructor could have made: both ends are valid points and the bulge a number.
- Length
Gets the length of the edge: along the arc when it is one, and straight across otherwise.
- MidPoint
Gets the point half way along the edge: the middle of its segment or of its arc.
- StartPoint
Gets the point the edge starts at.
Methods
- Clone()
Creates a copy of this edge.
- CollidesWith(GeoArc2)
Checks whether the edge touches an arc.
- CollidesWith(GeoArc2, Tolerance)
Checks whether the edge touches an arc, within a tolerance.
- CollidesWith(GeoCircle2)
Checks whether the edge touches a circle.
- CollidesWith(GeoCircle2, Tolerance)
Checks whether the edge touches a circle, within a tolerance.
- CollidesWith(GeoEdge2)
Checks whether the edge touches another edge.
- CollidesWith(GeoEdge2, Tolerance)
Checks whether the edge touches another edge, within a tolerance.
- CollidesWith(GeoFace2)
Checks whether this edge touches a face.
- CollidesWith(GeoFace2, Tolerance)
Checks whether this edge touches a face, within a tolerance.
- CollidesWith(GeoLine2)
Checks whether the edge touches a segment.
- CollidesWith(GeoLine2, Tolerance)
Checks whether the edge touches a segment, within a tolerance.
- CollidesWith(GeoPolygon2)
Checks whether the edge touches a polygon.
- CollidesWith(GeoPolygon2, Tolerance)
Checks whether the edge touches a polygon, within a tolerance.
- CollidesWith(GeoPolygonArc2)
Checks whether the edge touches a curved loop.
- CollidesWith(GeoPolygonArc2, Tolerance)
Checks whether the edge touches a curved loop, within a tolerance.
- CollidesWith(GeoPolyline2)
Checks whether the edge touches a polyline.
- CollidesWith(GeoPolyline2, Tolerance)
Checks whether the edge touches a polyline, within a tolerance.
- CollidesWith(GeoPolylineArc2)
Checks whether the edge touches a curved chain.
- CollidesWith(GeoPolylineArc2, Tolerance)
Checks whether the edge touches a curved chain, within a tolerance.
- CollidesWith(GeoRectangle2)
Checks whether the edge touches a rectangle.
- CollidesWith(GeoRectangle2, Tolerance)
Checks whether the edge touches a rectangle, within a tolerance.
- CollidesWith(GeoTriangle2)
Checks whether this edge touches a triangle, using the default tolerance.
- CollidesWith(GeoTriangle2, Tolerance)
Checks whether this edge touches a triangle, within a tolerance.
- DistanceTo(GeoArc2)
Gets the distance from the edge to an arc.
- DistanceTo(GeoArc2, Tolerance)
Gets the distance from the edge to an arc, within a tolerance.
- DistanceTo(GeoCircle2)
Gets the distance from the edge to a circle.
- DistanceTo(GeoCircle2, Tolerance)
Gets the distance from the edge to a circle, within a tolerance.
- DistanceTo(GeoEdge2)
Gets the distance from the edge to another edge.
- DistanceTo(GeoEdge2, Tolerance)
Gets the distance from the edge to another edge, within a tolerance.
- DistanceTo(GeoLine2)
Gets the distance from the edge to a straight segment.
- DistanceTo(GeoLine2, Tolerance)
Gets the distance from the edge to a straight segment, within a tolerance.
- DistanceTo(GeoPoint2)
Gets the distance from the edge to a point.
- DistanceTo(GeoPoint2, Tolerance)
Gets the distance from the edge to a point, within a tolerance.
- DistanceTo(GeoPolygon2)
Gets the distance from this edge to a polygon.
- DistanceTo(GeoPolygonArc2)
Gets the distance from this edge to a curved loop.
- DistanceTo(GeoPolygonArc2, Tolerance)
Gets the distance from this edge to a curved loop, within a tolerance.
- DistanceTo(GeoPolyline2)
Gets the distance from this edge to a polyline.
- DistanceTo(GeoPolylineArc2)
Gets the distance from this edge to a curved chain.
- DistanceTo(GeoPolylineArc2, Tolerance)
Gets the distance from this edge to a curved chain, within a tolerance.
- DistanceTo(GeoRectangle2)
Gets the distance from this edge to a rectangle.
- DistanceTo(GeoTriangle2)
Gets the distance from this edge to a triangle.
- Equals(GeoEdge2)
Determines whether another edge holds exactly the same ends and bulge.
- Equals(object)
Determines whether the specified object is an equal edge.
- Extend(double, LineEnd)
Lengthens the edge at one end, along itself.
- Extend(double, LineEnd, Tolerance)
Lengthens the edge at one end, along itself, within a tolerance.
- ExtendToLength(double, LineEnd)
Lengthens or shortens the edge at one end until it is a given length.
- ExtendToLength(double, LineEnd, Tolerance)
Lengthens or shortens the edge at one end until it is a given length, within a tolerance.
- GetChord()
Gets the chord of the edge: the straight segment between its ends, whether or not it bulges.
- GetClosestEdge(GeoPolygonArc2)
Gets the edge of this edge nearest a curved loop.
- GetClosestEdge(GeoPolygonArc2, Tolerance)
Gets the edge of this edge nearest a curved loop, within a tolerance.
- GetClosestEdge(GeoPolylineArc2)
Gets the edge of this edge nearest a curved chain.
- GetClosestEdge(GeoPolylineArc2, Tolerance)
Gets the edge of this edge nearest a curved chain, within a tolerance.
- GetClosestPointOnBoundary(GeoPoint2)
Gets the point of the edge closest to a point.
- GetClosestPointOnBoundary(GeoPoint2, Tolerance)
Gets the point of the edge closest to a point, within a tolerance.
- GetHashCode()
Returns the hash code for this edge.
- GetIntersections(GeoArc2)
Gets the points where the edge meets an arc.
- GetIntersections(GeoArc2, Tolerance)
Gets the points where the edge meets an arc, within a tolerance.
- GetIntersections(GeoCircle2)
Gets every point where this edge crosses a circle.
- GetIntersections(GeoCircle2, Tolerance)
Gets every point where this edge crosses a circle, within a tolerance.
- GetIntersections(GeoEdge2)
Gets the points where the edge meets another edge.
- GetIntersections(GeoEdge2, Tolerance)
Gets the points where the edge meets another edge, within a tolerance.
- GetIntersections(GeoFace2)
Gets every point where this edge crosses a face.
- GetIntersections(GeoFace2, Tolerance)
Gets every point where this edge crosses a face, within a tolerance.
- GetIntersections(GeoLine2)
Gets the points where the edge meets a straight segment.
- GetIntersections(GeoLine2, Tolerance)
Gets the points where the edge meets a straight segment, within a tolerance.
- GetIntersections(GeoPolygon2)
Gets every point where this edge crosses a polygon.
- GetIntersections(GeoPolygon2, Tolerance)
Gets every point where this edge crosses a polygon, within a tolerance.
- GetIntersections(GeoPolygonArc2)
Gets every point where this edge crosses a curved loop.
- GetIntersections(GeoPolygonArc2, Tolerance)
Gets every point where this edge crosses a curved loop, within a tolerance.
- GetIntersections(GeoPolyline2)
Gets every point where this edge crosses a polyline.
- GetIntersections(GeoPolyline2, Tolerance)
Gets every point where this edge crosses a polyline, within a tolerance.
- GetIntersections(GeoPolylineArc2)
Gets every point where this edge crosses a curved chain.
- GetIntersections(GeoPolylineArc2, Tolerance)
Gets every point where this edge crosses a curved chain, within a tolerance.
- GetIntersections(GeoRectangle2)
Gets every point where this edge crosses a rectangle.
- GetIntersections(GeoRectangle2, Tolerance)
Gets every point where this edge crosses a rectangle, within a tolerance.
- GetIntersections(GeoTriangle2)
Gets every point where this edge meets the edges of a triangle, using the default tolerance.
- GetIntersections(GeoTriangle2, Tolerance)
Gets every point where this edge meets the edges of a triangle, within a tolerance.
- GetParameterAtPoint(GeoPoint2)
Gets the normalized parameter of the point of the edge nearest a point, where 0 is its start and 1 its end.
- GetParameterAtPoint(GeoPoint2, Tolerance)
Gets the normalized parameter of the point of the edge nearest a point, within a tolerance.
- GetPointAtParameter(double)
Gets the point at a normalized parameter along the edge, where 0 is its start and 1 its end.
- GetShortestLineTo(GeoArc2)
Gets the shortest segment joining the edge to an arc.
- GetShortestLineTo(GeoArc2, Tolerance)
Gets the shortest segment joining the edge to an arc, within a tolerance.
- GetShortestLineTo(GeoCircle2)
Gets the shortest segment joining the edge to a circle.
- GetShortestLineTo(GeoCircle2, Tolerance)
Gets the shortest segment joining the edge to a circle, within a tolerance.
- GetShortestLineTo(GeoEdge2)
Gets the shortest segment joining the edge to another edge.
- GetShortestLineTo(GeoEdge2, Tolerance)
Gets the shortest segment joining the edge to another edge, within a tolerance.
- GetShortestLineTo(GeoFace2)
Gets the shortest segment leaving this edge and landing on a face.
- GetShortestLineTo(GeoFace2, Tolerance)
Gets the shortest segment leaving this edge and landing on a face, within a tolerance.
- GetShortestLineTo(GeoLine2)
Gets the shortest segment joining the edge to a straight segment.
- GetShortestLineTo(GeoLine2, Tolerance)
Gets the shortest segment joining the edge to a straight segment, within a tolerance.
- GetShortestLineTo(GeoPolygon2)
Gets the shortest segment leaving this edge and landing on a polygon.
- GetShortestLineTo(GeoPolygon2, Tolerance)
Gets the shortest segment leaving this edge and landing on a polygon, within a tolerance.
- GetShortestLineTo(GeoPolygonArc2)
Gets the shortest segment leaving this edge and landing on a curved loop.
- GetShortestLineTo(GeoPolygonArc2, Tolerance)
Gets the shortest segment leaving this edge and landing on a curved loop, within a tolerance.
- GetShortestLineTo(GeoPolyline2)
Gets the shortest segment leaving this edge and landing on a polyline.
- GetShortestLineTo(GeoPolyline2, Tolerance)
Gets the shortest segment leaving this edge and landing on a polyline, within a tolerance.
- GetShortestLineTo(GeoPolylineArc2)
Gets the shortest segment leaving this edge and landing on a curved chain.
- GetShortestLineTo(GeoPolylineArc2, Tolerance)
Gets the shortest segment leaving this edge and landing on a curved chain, within a tolerance.
- GetShortestLineTo(GeoRectangle2)
Gets the shortest segment leaving this edge and landing on a rectangle.
- GetShortestLineTo(GeoRectangle2, Tolerance)
Gets the shortest segment leaving this edge and landing on a rectangle, within a tolerance.
- GetShortestLineTo(GeoTriangle2)
Gets the shortest segment leaving this edge and landing on a triangle, using the default tolerance.
- GetShortestLineTo(GeoTriangle2, Tolerance)
Gets the shortest segment leaving this edge and landing on a triangle, within a tolerance.
- IsEqualTo(GeoEdge2)
Determines whether another edge draws the same piece, within the default tolerance.
- IsEqualTo(GeoEdge2, Tolerance)
Determines whether another edge draws the same piece, within a tolerance.
- IsPointOn(GeoPoint2)
Determines whether a point lies on this edge.
- IsPointOn(GeoPoint2, Tolerance)
Determines whether a point lies on this edge, within a tolerance.
- Locate(GeoPoint2)
Says where a point lies with respect to this edge.
- Locate(GeoPoint2, Tolerance)
Says where a point lies with respect to this edge, within a tolerance.
- Reverse()
Gets the edge running the other way, from this one's end to its start.
- RotateBy(double, GeoPoint2)
Gets the edge turned about a point.
- ToArc()
Gets the edge as an arc.
- ToLine()
Gets the edge as a straight segment.
- ToString()
Describes the edge.
- TransformBy(GeoTransform2)
Gets the edge under a transformation.
- Translate(GeoVector2)
Gets the edge moved by a vector.
- TryIntersectWith(GeoArc2, out GeoPoint2[])
Tries to find where this edge crosses an arc.
- TryIntersectWith(GeoArc2, out GeoPoint2[], Tolerance)
Tries to find where this edge crosses an arc, within a tolerance.
- TryIntersectWith(GeoCircle2, out GeoPoint2[])
Tries to find where this edge crosses a circle.
- TryIntersectWith(GeoCircle2, out GeoPoint2[], Tolerance)
Tries to find where this edge crosses a circle, within a tolerance.
- TryIntersectWith(GeoPolygonArc2, out GeoPoint2[])
Tries to find where this edge crosses a curved loop.
- TryIntersectWith(GeoPolygonArc2, out GeoPoint2[], Tolerance)
Tries to find where this edge crosses a curved loop, within a tolerance.
- TryIntersectWith(GeoPolylineArc2, out GeoPoint2[])
Tries to find where this edge crosses a curved chain.
- TryIntersectWith(GeoPolylineArc2, out GeoPoint2[], Tolerance)
Tries to find where this edge crosses a curved chain, within a tolerance.
- TrySplitAtParameter(double, out GeoEdge2, out GeoEdge2, Tolerance)
Splits the edge at a normalized parameter along it.
- TryTrimTo(GeoPoint2, LineEnd, out GeoEdge2)
Shortens the edge at one end back to a point on it.
- TryTrimTo(GeoPoint2, LineEnd, out GeoEdge2, Tolerance)
Shortens the edge at one end back to a point on it, within a tolerance.
Operators
- operator ==(GeoEdge2, GeoEdge2)
Determines whether two edges hold exactly the same values.
- operator !=(GeoEdge2, GeoEdge2)
Determines whether two edges hold different values.